Navigation


CHRONOFLY CHR200F
Outdoor WiFi CPE with built-in antenna.

Built-in antenna for maximum efficiency The ideal complement to your Chronolink network infrastructure. Professional 2.4GHz Wireless LAN CPE for outdoor installation, with built-in antenna and full IEEE802.11b/g standard compliance. The enclosure and the antenna section are completely designed and manufactured by Linkit.
High performance and flexibility The Chronofly product line is specifically engineered to meet the requirements of even the most advanced wireless operator. All devices run the RouterOS software and combine a high-gain antenna with integrated routing, NAT and WDS functions, allowing the easy design and deployment of large networks without sacrificing maintainability and scalability.
CHRONOFLY CHR200F

IEEE standards 802.11b - 802.11g
Frequency 2400 - 2480 MHz
Modulation DSSS (DBPSK, DQPSK, CCK)
OFDM (BPSK, QPSK, 16QAM, 64QAM)
Channel Bandwidth 5MHz - 10MHz - 20MHz
Antenna Type Built-in flat panel
Antenna Gain 14dB
H and V : 35° @3 dB
Antenna f/b ratio >20dB
Maximum output power 100mW EIRP
Output Power Adjustment Range 20dB in 1dB steps
RX sensitivity

(including antenna gain)
-109 dBm @   1 Mbps
-104 dBm @ 11 Mbps
 -97 dBm @ 22 Mbps
 -87 dBm @ 54 Mbps
Wireless modes Bridge - WDS - Station
Data Encryption WEP - WPA - WPA2 - TKIP - AES CCM
Ethernet standard 10/100 Base-T - Auto-MDI/X - 802.3
VLAN support 802.1q - Multiple VLAN interface - Inter VLAN routing
VPN support IPSEC, PPPoE, EoIP, PPTP, L2TP
QoS support 802.1p - IPToS RFC791 - CBQueuing - PCQ RED
SFQ FIFO queue - CIR - MIR - peer-to-peer managment
Routing protocols OSPF - RIP - BGP - STP - RSTP - NAT - MPLS - IPv6 - MME
Management Telnet - SSH - FTP - WEB - GUI
RSSI indication - no -
Power supply 18V dc 250mA - P.O.E.
Operating temperature - 20°C / + 55°C
Size mm (H x W x D) 255 x 255 x 70
Weight 1.3 Kg
Safety rating IP67
Standards EN300328 EN301489-17 EN60950-1