Navigation


CHRONOLINK CHR5020N
Two Radios, Dual band – WiFi and Hiperlan – wireless equipment .

Dual Band CHR5020N features two completely independent dual-band radio modules. Each module can be connected to a different type of antenna (directional, sectorial or omnidirectional) in order to satisfy the requirements of any specific application. Output power can be limited to allow the use of high gain antennas without exceeding the limits set forth by international regulations.
Flexibility – Mesh Each radio module can operate in Access Point, Bridge or Station mode. The tworadio modules are completely independent of each other, and can be connected via IP routing. Chronolink equipment can create and manage Mesh networks using a proprietary protocol.
Access Point Function and assigned bandwidth limiting Chronolink allows the management of the available bandwidth as well as of the flow priority and maximum bandwidth assigned to each customer or group of customers; even the most complex Quality of Service requirements can be met through the definition of custom policies.
Optimized for performance: 300Mbps MIMO operation allows the optimization of data rate and throughput by simultaneously using two antennas for transmission. This allows the device to achieve unprecedented effective bit rates of up to 300 Mbps in IEEE802.11n mode.
CHRONOLINK CHR5020N

Number of radio modules 2
IEEE Standard 802.11a   802.11b   802.11g   802.11h   802.11n
Frequency 2.400 - 2.483 MHz & 5.470 - 5.725 MHz
Modulation DSSS (DBPSK, DQPSK, CCK)
OFDM (BPSK, QPSK, 16QAM, 64QAM)
Channel bandwidth 5MHz - 10MHz - 20MHz - 2 x 20MHz
Channel selection Manual - Automatic - DFS - Radar Free
Maximum output power + 18 dBm
Power adjustment from -2 dBm to +18 dBm in 1 dB steps
RX sensitivity 2.4 GHz

-95 dBm @  1 Mbps
-90 dBm @  6 Mbps
-90 dBm @ 11 Mbps
-73 dBm @ 54 Mbps
5.6 GHz

-90 dBm @  6 Mbps
-81 dBm @ 24 Mbps
-76 dBm @ 36 Mbps
-73 dBm @ 54 Mbps
Wireless modes Access Point - Bridge - Repeater - WDS - Station - Hot Spot
Data encryption WEP - WPA - WPA2 - TKIP - AES CCM
Ethernet standard 10/100 Base-T - Auto-MDI/X - 802.3
VLAN 802.1q - Multiple VLAN interface - Inter VLAN routing
VPN IPSEC, PPPoE, EoIP, PPTP, L2TP
QoS 802.1p - IPToS RFC791 - CBQueuing - PCQ RED
SFQ FIFO queue - CIR - MIR - peer-to-peer managment
Network Routing OSPF - RIP - BGP - STP - RSTP - NAT - MPLS - IPv6 - MME
Mesh HWMP+, propietary layer2 wireless mesh routing protocol
Management Telnet - SSH - FTP - WEB - GUI
Signalling 64 char. LCD display
Power supply 18V dc 450mA - P.O.E.
Antenna connectors N female
Operating temperature - 35°C / + 60°C
Dimensions mm (H x L x D) 260 x 230 x 70
Weight 3.1 Kg
Protection IP67
Standards EN301893 EN300328 EN301489-17 EN60950-1 ERC70-03