Navigation


CHRONOLINK CHR1013N
Dual band – WiFi and Hiperlan - IEEE802.11n MIMO – wireless equipment .

Dual Band
IEEE802.11n MIMO
CHR1013N features a single dual-band radio module with support for MIMO operation. MIMO is available in both the 2.4 and the 5GHz frequency band and allows reaching significantly higher throughput on a single channel by exploiting spatial diversity through the use of two antennas.
Flexibility – Mesh The device can operate in Access Point, Bridge or Station mode. Chronolink equipment can create and manage Mesh networks using a proprietary protocol.
Access Point Function and assigned bandwidth limiting Chronolink allows the management of the available bandwidth as well as of the flow priority and maximum bandwidth assigned to each customer or group of customers; even the most complex Quality of Service requirements can be met through the definition of custom policies.
High performance: up to 300Mbps Support for the new MIMO standard allows Chronolink products to attain unprecedented performance in terms of bandwidth and effective throughput.
Details Three Ethernet ports.
Direct or PoE power supply.
CHRONOLINK CHR1013N

Number of radio modules 1
IEEE Standard 802.11a   802.11b   802.11g   802.11h   802.11n
Frequency 2.400 - 2.483 MHz & 5.470 - 5.725 MHz
Modulation DSSS (DBPSK, DQPSK, CCK)
OFDM (BPSK, QPSK, 16QAM, 64QAM)
Channel bandwidth 5MHz - 10MHz - 20MHz - 2x20MHz
Channel selection Manual - Automatic - DFS - Radar Free
Maximum output power + 18 dBm
Power adjustment from -2 dBm to +18 dBm in 1 dB steps
RX sensitivity 2.4 GHz

-95 dBm @  1 Mbps
-90 dBm @  6 Mbps
-90 dBm @ 11 Mbps
-73 dBm @ 54 Mbps
5.6 GHz

-90 dBm @  6 Mbps
-81 dBm @ 24 Mbps
-76 dBm @ 36 Mbps
-73 dBm @ 54 Mbps
Wireless modes Access Point - Bridge - Repeater - WDS - Station - Hot Spot
Data encryption WEP - WPA - WPA2 - TKIP - AES CCM
Ethernet standard 10/100 Base-T - Auto-MDI/X - 802.3
VLAN 802.1q - Multiple VLAN interface - Inter VLAN routing
VPN IPSEC, PPPoE, EoIP, PPTP, L2TP
QoS 802.1p - IPToS RFC791 - CBQueuing - PCQ RED
SFQ FIFO queue - CIR - MIR - peer-to-peer managment
Network Routing OSPF - RIP - BGP - STP - RSTP - NAT - MPLS - IPv6 - MME
Mesh HWMP+, propietary layer2 wireless mesh routing protocol
MIMO 2 x 2
Management Telnet - SSH - FTP - WEB - GUI
Power supply 18V dc 400mA - P.O.E.
Antenna connectors N female
Operating temperature - 10°C / + 50°C
Dimensions mm (H x L x D) 38 x 140 x 200
Weight 1.0 Kg
Protection indoor use only
Standard EN301893 EN300328 EN301489-17 EN60950-1 ERC70-03