Radio Device type |
Chronolink CHR5010 |
Number of radio modules |
1 |
IEEE Standards |
802.11a 802.11b
802.11g 802.11h Hiperlan2 |
Frequency |
2.400 - 2.483 MHz
& 5.470 - 5.725 MHz |
Modulation |
DSSS (DBPSK, DQPSK,
CCK)
OFDM (BPSK, QPSK, 16QAM, 64QAM) |
Channel bandwidth |
5MHz - 10MHz - 20MHz
- 40MHz |
Channel selection |
Manual - Automatic
- DFS - Radar Free |
Maximum TX power |
+ 18 dBm |
TX power adjustment |
da -2 dBm a +18
dBm in 1dB step |
RX sensitivity |
2.4 GHz
-95 dBm @ 1 Mbps
-90 dBm @ 6 Mbps
-90 dBm @ 11 Mbps
-73 dBm @ 54 Mbps |
5.6 GHz
-90 dBm @ 6 Mbps
-81 dBm @ 24 Mbps
-76 dBm @ 36 Mbps
-73 dBm @ 54 Mbps |
Wireless modes |
Access Point - Bridge
- Repeater - WDS - Station - Hot Spot |
Data security |
WEP - WPA - WPA2
- TKIP - AES CCM |
Ethernet Standards |
10/100 Base-T -
Auto-MDI/X - 802.3 |
VLAN management |
802.1q - Multiple
VLAN interface - Inter VLAN routing |
VPN management |
IPSEC, PPPoE, EoIP,
PPTP, L2TP |
QoS management |
802.1p - IPToS RFC791
- CBQueuing - PCQ RED SFQ FIFO queue - CIR - MIR - peer-to-peer managment |
Network Routing |
OSPF - RIP - BGP
- STP - RSTP - NAT - MPLS - IPv6 - MME |
Mesh |
HWMP+, propietary
layer2 wireless mesh routing protocol |
Management |
Telnet - SSH - FTP
- WEB - GUI |
Status display |
64 characters LCD display |
Power supply |
18V dc 400mA - P.O.E. |
Antenna connector |
N female |
Operating temperature |
- 35°C / + 60°C |
Dimensions mm (H x W x D) |
260 x 230 x 70 |
Weight |
3.0 Kg |
Protection level |
IP67 |
Legal rules |
EN301893 EN300328 EN301489-17
EN60950-1 ERC70-03 |
|
|
Antenna type |
2G4OV9 |
Antenna gain |
9 dBi |
Antenna Beam width |
360° |
Antenna polarization |
Vertical |
|