| Radio device type |
2 x Chronolink CHR7016 |
| IEEE standards |
802.11a 802.11b
802.11g 802.11h Hiperlan2 |
| Frequency |
2.400 - 2.483 MHz
& 5.470 - 5.725 MHz |
| Modulation |
DSSS (DBPSK, DQPSK,
CCK)
OFDM (BPSK, QPSK, 16QAM, 64QAM) |
| Channel bandwidthe |
5MHz - 10MHz - 20MHz
- 40MHz |
| Channel selection |
Manual - Automatic - DFS - Radar Free |
| Antenna type |
Built-in 60cm parabolic disk |
| Antenna gain |
21dB @ 2.4GHz - 29dB @ 5.6GHz |
| Antenna beam width |
H/V : 2.4GHz 13° @3 dB ; 5.6GHz 6° @ 3dB |
| Antenna f/b ratio |
>30dB |
| Maximum output power |
100mW EIRP @ 2.4GHz - 1W EIRP @ 5.6GHz |
| TX power adjustment |
20dB in 1dB steps |
RX sensitivity
(including antenna gain) |
2.4 GHz
-116 dBm @ 1 Mbps
-111 dBm @ 11 Mbps
-103 dBm @ 22 Mbps
-94 dBm @ 54 Mbps |
5.6 GHz
-119 dBm @ 6 Mbps
-110 dBm @ 24 Mbps
-105 dBm @ 36 Mbps
-102 dBm @ 54 Mbps |
| Wireless operating mode |
Bridge - WDS - Station |
| Data encryption |
WEP - WPA - WPA2
- TKIP - AES CCM |
| Ethernet standards |
10/100 Base-T -
Auto-MDI/X - 802.3 |
| VLAN support |
802.1q - Multiple
VLAN interface - Inter VLAN routing |
| VPN support |
IPSEC, PPPoE, EoIP,
PPTP, L2TP |
| QoS support |
802.1p - IPToS RFC791
- CBQueuing - PCQ RED
SFQ FIFO queue - CIR - MIR - peer-to-peer managment |
| Network Routing |
OSPF - RIP - BGP
- STP - RSTP - NAT - MPLS - IPv6 - MME |
| Management |
Telnet - SSH - FTP
- WEB - GUI |
| Status indication |
32 characters LCD display (option) |
| Power supply |
18V dc 400mA - P.O.E. |
| Operating temperature range |
- 35°C / + 60°C |
| Dimensions mm (H x W x D) |
610 x 610 x 320 |
| Weight |
4.6 Kg |
| Safety Rating |
IP67 |
| Standards |
EN301893 EN300328 EN301489-17
EN60950-1 ERC70-03 |
| |
 "50km Point-to-Point Link")
 "50km Point-to-Point Link")
 "50km Point-to-Point Link")